Explosion-proof LED lighting fixtures VELAN34

Novelty
Simplicity and reliability;
The ability to use lamps for general lighting;
Eleven types of mounts;
The ability to manufacture lamps with a power of 30 to 120 watts.
Certificate Type Product Description Certificate
TR TS

Purpose

Explosion-proof LED lighting fixtures are intended for general lighting of explosion-hazardous areas in accordance with explosion-proof marking.

Features

  • LED light sources allow service cost reduction. LED service life is approximately 100,000 hours.
  • A LED light source consumes up to ten times less electricity than an incandescent lamp with the same luminous flux.
  • Glass permits over 90 % of luminous flux, virtually without absorbing it.
  • A corrosion-resistant modified aluminium alloy with special coating provides for longer service life of the article.
  • Eleven options of lighting fixture mounts allow its installation on almost every surface and under any conditions.

Design

The lighting fixture is cylindrical and is made of aluminium alloy. The light-transmitting element is fixed by a set of two aluminium rings. The cooling unit of the lighting fixture ensures reliable heat removal.
The lighting fixture consists of two separate flame-proof compartments: one of them is for LEDs, while the other – for inputs and a power box.
The LED compartment is connected with the inputs compartment by wires routed inside the cooling unit and sealed with a compound.

Light source

High-brightness LEDs.

Scope of delivery

The lighting fixture is supplied complete with a LED light source and a selected mount type. The “Support” rack is not manufactured by the factory.
The following items can be ordered as an option:
The following cable inputs can be ordered for a suspended mount V, ceiling mount P, wall mounts N1 and N2:

  • VK-X-VEL 2BM-M25х1.5-M for armoured cables;
  • VK-X-VEL 4-M25х1.5-Exd or VK-X-VEL 2-M25х1.5-Exd for non-armoured cables;
  • VK-X-VEL 2BT-M25х1.5-Exd-G3/4" for armoured cables in conduits or for connection of this cable in a metal hose by coupling sleeve MMRn-20;
  • VK-X-VEL 2BT-M25х1.5-Exd-G3/4" for non-armoured cables in conduits or for connection of this cable in a metal hose by coupling sleeve MMRn-20;

If availability of cable inputs is not indicated by the Customer, mounts V, P, N1, and N2 are supplied with M25х1.5 threaded plugs.

The following cable inputs can be ordered for mounting on clamp S1:

  • VK-X-VEL 2BM-G3/4"-Exd for armoured cables;
  • VK-X-VEL 4-G3/4"-Exd or VK-X-VEL 2-G3/4"-Exd for non-armoured cables;
  • VK-X-VEL 2 BT-G3/4"-Exd-G3/4” for armoured cables in conduits or for connection of this cable in a metal hose by coupling sleeve MMRn-20;
  • VK-X-VEL 2BT-G3/4"-Exd-G3/4" for armoured cables in conduits or for connection of this cable in a metal hose by coupling sleeve MMRn-20.

If the lighting fixture is ordered without a mount but with a cover, please consider the lighting fixture thread G3/4".

Client Technical Support Service: 8 800 200 62 22